C H A P T E R 1 Intel Express 550T Routing Switch

LED

Indicates

Green and Orange both

Collision detected (with half duplex).

blinking randomly

Port enabled, link pulse active.

 

 

Orange, solid

Port disabled by management.

 

 

Green and Orange both

Port disabled by a hardware fault, or no

solid

hardware connected.

 

 

Default settings after start-

Once the switch has started successfully, installation is complete and

up

the switch is using its default setting (also known as default configu-

 

ration):

 

All ports are enabled.

 

All ports operate in auto-negotiation mode.

 

Spanning Tree is disabled on all ports.

 

Addresses that have been silent for more than 15 minutes are

 

 

purged from the switch’s address table (the MAC Address Aging

 

 

time).

 

No access restrictions to Local Management (Telnet).

 

No SNMP restrictions.

 

No permanent MAC address entries defined. A permanent entry

 

 

is a MAC address that is defined as being permitted only on a cer-

 

 

tain port. This can be a useful security feature.

 

All ports are in the same VLAN (named <System>) and VLAN

 

 

mode (Stand-alone mode). VLANs allow you to create virtual

 

 

networks using specific switch ports, IP addresses, IP subnets and

 

 

MAC addresses.

 

Flow Control is enabled on all ports.

 

The connection with Local Management is timed-out after 10

 

 

minutes if there has been no input during this period.

After start-up

This default configuration is adequate for simple workgroup environ-

 

ments to operate in basic switching mode.

Although the switch continues to operate without problems, we rec- ommend that you change certain parameters to suit your own require- ments.

14

Page 25
Image 25
Intel 550T manual Ration, All ports are enabled, All ports operate in auto-negotiation mode, Time, No Snmp restrictions