Intel 550T manual Local Time, Authentication

C H A P T E R 3 Standard Configuration

Setting the date and clock to local time

Local Time

To change the clock in the switch to your local time:

1Select Device Setup or Stack Setup.

2Click Date/Time.

3Click Insert Current PC Date/Time to show the present settings. If this is satisfactory, click OK.

Note The clock displays the time at which it is accessed and not the current time.

4If the time or the date is not satisfactory, click the date and/or time options and type the new time and date.

5Click OK.

Authentication

Purpose	SNMP is a fully defined, interoperative standard that helps you man-
	age both the switch and the network. To do this you can:
	•	Specify the names of the hosts to access the SNMP agent on the
		switch (authentication) by defining the source IP and community
	•	Specify read-write or read-only for authenticated hosts
	•	Request a trap to be sent if authentication is violated
	Note If no hosts are defined in the Authentication List, any host
		can access the SNMP agent in the switch.

45