Intel 550T manual Click the name of the Vlan you want to edit

C H A P T E R 4 Advanced Configuration

4/Routing

Adding a policy to a VLAN You may want to add another policy (that is, a port, IP address, IP subnet or MAC address) to an existing VLAN. To add a policy:

1Select VLAN/Routing Setup.

2Click the name of the VLAN you want to edit.

3Select Policies>Add.

4Select the New policy type.

5Fill in the appropriate field(s).

6Click Close.

Adding a new switch to a distributed VLAN

If Intel Device View is connected to an existing switch, the new switch needs to be learned by the management VLAN before Intel Device View can access it.

We recommend that you connect Intel Device View directly to the new switch, or use a port-policy rule to learn it.

If you do not add the port on which the new switch is connected (us- ing the port-policy rule), you must add the MAC address for the new switch instead.

For example, if you define the membership of a VLAN using a MAC policy, you need to use two MAC addresses. If the System MAC ad- dress is 00A0C9xxxxxx, you must enter 00A0C9xxxxxx and 02A0C9xxxxxx in the MAC policy.

66