![](/images/new-backgrounds/1146374/146374109x1.webp)
ENTER COMMUNICATION OPTION MENU:
Press a
Press d
Press a
Press d
1)Press a, if necessary, until CNFG prompt appears.
2)Display advances to INPT Input Menu.
3)Press a, if necessary, until display advances to COMM Communication Options Menu.
4)Display advances to C.PAR Communication Parameters Submenu.
If Communication Option is not installed, the display shows NONE and skips to the Color Display Menu.
COMMUNICATION PARAMETERS SUBMENU:
Allows the user to adjust Serial Communications Settings of the instrument. When connecting an instrument to a computer or other device, the Communications Parameters must match. Generally the default settings (as shown in Section 5) should be utilized.
Press d 5) Display advances to BAUD Baud Submenu.
BAUD SUBMENU:
Press d Press b
Press d
6)Display flashes previous selection for BAUD value.
7)Scroll through the available selections: 300_, 600_, 1200_, 2400_, 4800_, 9600_, 19.2K.
8)Display shows STRD stored message momentarily and then advances to PRTY only, if it was changed, otherwise press a to advance to PRTY Parity Submenu.
PARITY SUBMENU:
Press d
Press b
Press d
9)Display flashes previous selection for “Parity”.
10)Scroll through the available selections: NO, ODD, EVEN.
11)Display shows STRD stored message momentarily and then advances to DATA only, if it was changed, otherwise press a to advance to DATA Data Bit Submenu.
DATA BIT SUBMENU:
Press d
Press b
Press d
12)Display flashes previous selection for “Data Bit”.
13)Scroll through the available selections:
14)Display shows STRD stored message and then advances to STOP only, if it was changed, otherwise press a to advance to STOP Stop Bit Submenu.
51