Omega CNiS16, CNiS8DH manual Excitation Output, Top View Location of S2 on 1/8 DIN Compact Unit

2.3.5 Wiring Outputs (continued)

This meter is capable of supplying 5 or 10 Vdc sensor excitation. The excitation output connection and location of S2 pin selection jumper are shown below.

Excitation is not available if Serial Communication (-C24) or Ethernet (-C4EI) or Low Voltage Power Supply (-DC) options are installed.

Figure 2.14
a) Excitation Output	b) Top View Location of S2

c) Top View Location of S2 on 1/8 DIN Compact Unit

Install jumpers according to the table below.

Table 2.4 Jumper Connections

	Excitation Output		S2
		A		B
	10 V	Close		Open
	5 V	Open		Close
Factory default is 10 V.

12