Power Saving
The monitor will be driven into “Power Saving” mode by the control signal from the display controller, as indicated by the
State | Power Consumption | LED Light |
|
|
|
ON | Normal | Green |
|
|
|
OFF | < 4 W | Amber |
|
|
|
The power saving states will be kept until a control signal has been detected, or the keyboard or mouse is activated. The recovery time from Active OFF state back to ON state is around 10 seconds.
Install the Monitor
•To connect the tilt/swivel base to the monitor, align hooks with the sockets on bottom side of the monitor, and gently push the base towards the front of the monitor.
•The
•Turn the PC power switch ON. Then turn the monitor power switch ON by pressing the switch inward. The green power indicator will light up.
•Allow about 30 seconds for the CRT tube to warm up. Data will be displayed on the screen.
•If your display fails to function properly, please first refer to the section “Troubleshooting” in this manual.
2User’s Guide
Filename: mb416033.doc | Title: User's Guide - CRT Color Monitor Series FS7600, vx74 [English] | |||
Template: Print_2004.dot | Author: WASSER Studios | Last Saved By: Kim Toy | ||
Revision #: 22 | Page: 2 of 20 | Printed: 06/03/04 10:15 AM | ||
