RF-Link Technology NL6000 manual Restoring Default Parameters

to restore parameters at this time, press ESC.

When you press Y, the system erases the current parameter file in flash memory.

4.When the system prompts you to send the parameter file, initiate the restore using the terminal emulator.

∙If you use Procomm, use the Send ASCII Text option.

∙If you use HyperTerminal, use the Send Text File option.

A success message appears when the restore is complete.

5.When the download is complete, cycle power to let the modem start using the new parameter settings.

6.Press ESC to continue using the Save/Restore Parameters menu.

Restoring Default Parameters

Use the following procedure to restore factory-delivered default parameter settings to the unit currently attached to the serial port.

1.Select Save/Restore Parameters ä Restore Default Parameters. The system prompts you to confirm that you want to restore the default parameter settings.

2.Press Y to confirm that you want to restore the default settings. If you do not want to restore default settings at this time, press ESC.

When you press Y, the system erases the parameter file in flash memory and restores the default settings. A success message appears when the restore is complete.

3.When the download is complete, cycle power to let the modem start using the new parameter settings.

4.Press ESC to continue using the Save/Restore Parameters menu.

RF Neulink 37 NL6000 User Guide