RF-Link Technology NL6000 - page 20

RF Neulink NL6000 User Guide
20
Figure 12: Repeat to Multiple Remotes using Wildcard
Likewise, it is possible to set up asingle repeater entry that will repeat
packets received from any member of agroup of hidden remotes. In Figure
13, arepeater entry with aTrigger =MYID and ID =42FF repeats any
packet received from the group of remotes matching MYID42FF.
Figure 13: Repeat from Multiple Remotes using Wildcard
If you plan to use more than one frequency in your network, frequency
planning is important when you use repeaters. Repeaters, like any other
unit, have only one receive frequency. It is important that all units
transmitting data to arepeater transmit on the repeatersreceive
frequency (F
A
), as shown in Figure 14.
Figure 14: Sample Frequency Plan for aRepeater