Jenn-Air DUAL-FUEL SLIDE-IN RANGE Control Options, Oven Light, Options Available, To Adjust

OVEN COOKING, CONT.

CONTROL OPTIONS	12 HOUR OFF/SABBATH
	MODE (2)

DEFAULT (9)

The control can be reset to restore the factory setting for each option.

TO CHANGE FACTORY SET DEFAULT OPTIONS:

1.Press the Setup Options (0) pad and the desired option pad. (See Options below.)

2.Current option will appear in the dis- play.

3.Press the Auto Set pad to change the option.

The oven may be set to turn off after 12 hours or stay on indefinitely. The

default is set to turn off after 12 hours.

SOUND LEVEL (3)

The sound of the chimes may be changed with IIIIIIII(8) being the high- est volume and I(1) being the lowest. The default is set at level 6.

DISPLAY ON/OFF (CLOCK)

The time-of-day display may be shut off when the oven is not in a cooking or cleaning function.

OVEN TEMPERATURE

ADJUSTMENT

4. Press any function pad other than the	12/24 HOUR CLOCK (4)
Cancel pad to set the displayed option	The clock may be set for a 12-hour or
and exit the program.	24-hour clock. The default is set for a 12-
	hour clock.

If you think the oven is operating too cold or hot, you can adjust it. Bake several test items and then adjust the temperature setting not more than 10° F at a time.

TO ADJUST:

OPTIONS AVAILABLE:

END-OF-TIMER SIGNAL (TIMER 1 & TIMER 2)

There are three choices for the end of "timer" reminder signals.

•Two chimes (Timer 1) or four chimes (Timer 2) followed by one chime every 30 seconds for up to five minutes (default setting).

•Two chimes (Timer 1) or four chimes (Timer 2) followed by one chime every minute for up to 30 minutes.

•Two chimes (Timer 1) or four chimes (Timer 2) followed by no other chimes.

NOTE: The reminder signal chosen will apply to both timers.

CONTROL LOCK (1)

The function pads on the control can be locked to prevent unwanted use for safety and cleaning benefits.

Control Lock will not lock out the Timer, Clock or Oven Light.

SCROLL SPEED (5)

The scroll speed of the messages in the display may be changed from FAST to MEDIUM to SLOW. The

default is set for the medium speed.

END-OF-COOK TIME

SIGNAL (6)

There are three choices for the end of "clock controlled cooking" reminder signals.

•Three chimes followed by two chimes every minute for up to 30 minutes (de- fault setting).

•Three chimes followed by no other chimes.

•Three chimes followed by two chimes every 30 seconds for up to five minutes.

TEMP C/F (7)

The temperature scale may be changed to Centigrade or Fahren-

heit. The default is set for Fahrenheit.

LANGUAGE (8)

The words which scroll in the display may be changed from English to French or Span- ish.

1.Press the Bake pad and enter 550° F.

2.Press and hold the Bake pad for several seconds until TEMP ADJ is displayed.

3.Press the Auto Set pad - each press changes the temperature by 5° F. The control will accept changes from -35°to +35° F.

4.If the oven was previously adjusted, the change will be displayed. For example,

if the oven temperature was reduced by 15° F, the display will show -15°F.

5.When you have made the adjustment, press any function pad, OPTION CHANGED will scroll and the time of day will reappear in the display. The oven will now bake at the adjusted temperature.

NOTE: It is not recommended to change the oven temperature if only one or two recipes are in question.

OVEN LIGHT

The oven light automatically comes on when the door is opened. When the door is closed, press the Oven Light pad on the control panel to turn the light on or off.

The oven light will come on automatically one minute before the end of a clock controlled cooking operation.

12