Kyocera FS-C8008N, FS-C8008DN Paper Handling, MP Tray Mode Cassette, MP Tray Mode ? Cassette

3.10 Paper Handling

3.10Paper Handling

This section explains how to change mode for the MP (multi-purpose) tray, the paper size and type for each paper source, mode for the option sorter, and how to select the paper source and paper destinations.

3.10.1 MP Tray Mode

The MP tray can be used in either of two modes — Cassette or First. The MP tray feed paper differently depending on the mode:

•Cassette Mode (default)

The MP tray acts in the same manner as other paper source. The printer can correctly feed paper from any paper source as you command on the printer driver. The cassette mode provides a faster printing speed than the first mode.

•First Mode

The MP tray automatically feeds paper placed on the MP tray overriding another paper source that is selected on the printer driver. After all paper sheets in the MP tray have been used up (approximately 150 sheets), paper will be fed from the paper source originally selected. This mode is convenient to feed paper of special size or type without reloading the current paper source. However, the MP tray must be kept empty if you desire to feed paper from the intended paper source.

To switch the MP tray to First mode, proceed as follows:

1

2

3

4

Press the MENU key.

Press the U or V key repeatedly until Paper Handling > appears.

Paper Handling >

Press the Z key.

Press the U or V key repeatedly until >MP Tray Mode appears.

>MP Tray Mode

Cassette

5 Press the ENTER key. A blinking question mark (?) appears.

>MP Tray Mode

? Cassette

6

7

8

Press the U or V key to change Cassette to First.

Press the ENTER key. The MP tray mode is changed.

To exit the menu selection, press the MENU key.

3-69