Kyocera FS-C8008DN, FS-C8008N manual Thickness Caliper, Moisture content, Grain

2.2 Selecting the Right Paper

U. S. Bond Weight (lb)	Europe Metric Weight (g/m²)
28	105
32	120
34	128
36	135
39	148
42	157
43	163
47	176
53	199

Table 2-4 (Continued)

Thickness (Caliper)

Thick paper is called high-caliper paper and thin paper is called low-caliper paper. Paper used by the printer should be neither too thick nor too thin. If you encounter paper jam, multiple-sheet feed, or too light printing problems, the paper may be too thin. If you encounter paper jam or too heavy printing problems, the paper may be too thick. The recommended thickness of a sheet for this printer is between 0.086 and 0.110 mm (from 3.4 to 4.3 mils).

Moisture content

Moisture content is the percentage of the weight of water in paper. Moisture affects the appearance, feeding, curling, electrostatic properties, toner fusing of the paper.

The moisture content of paper varies with the relative humidity in the room. If the room is too humid, paper will absorb more moisture. The edges will swell and the paper will become wavy. If the room is too dry and the paper loses moisture, the edges shrink and tighten, and the print contrast may be degraded.

Wavy or tight edges can cause paper misfeeds and misalignments. The recommended moisture content is between 4 and 6 %.

To maintain the correct moisture content level, store the paper in an environment that allows moisture control. These are tips for moisture control:

•Store paper in a cool, dry place.

•Leave packages of paper wrapped as long as possible. Rewrap unused paper.

•Return paper to its paper carton, whenever possible. Place the cartons on a pallet or other furniture so that they are not in direct contact with the floor.

•Before using paper stored for an extended period of time, condition it in the printer’s environment for at least 48 hours.

•Do not expose paper to heat, direct sunlight, or damp.

Grain

Technically, grain is the direction of paper in the paper machine. Grain is parallel with the direction of movement in the paper machine. Grain long means that the grain runs along the length of the sheet, and grain short means that the grain runs along the width of the sheet. Because grain short causes paper feed problems, always select grain long for the printers.

2-6