Kyocera FS-C8008DN, FS-C8008N General Guidelines, Tips, Symptom Check Items Corrective Action

4.1 General Guidelines

4.1General Guidelines

The table below provides basic solutions for problems you may encounter with the printer.

We suggest you consult this table to troubleshoot the problems before calling for service.

Symptom	Check Items	Corrective Action
Print quality is not	See Section 4.2 Print Quality Problems on page 4-3.
good.
Paper is jammed.	See Section 4.4 Clearing Paper Jams on page 4-12.
Nothing lights on	Check that the power cord is properly	Turn off the printer’s power, plug in the
the operator panel	plugged into the power outlet.	power cord securely, and try turning on
even when power is		the printer’s power again.
turned on and the
	Check that the power	Set the power switch to the On position.
fan makes no noise.
	switch is in the On ()
	position.
The printer prints a	Check the printer cable or the interface	Connect both ends of the printer cable
status page, but	cable.	securely. Try replacing the printer cable
does not print jobs		or the interface cable.
from the computer.
	Check program files and application	Try printing another file or using another
	software.	print command. If the problem occurs
		only with a specific file or application,

check the printer driver settings for that application.

Table 4-1

4.1.1Tips

Printer problems may be solved easily by following the tips below. When you have encountered a problem that following the above guidelines will not solve, try the following:

•Turn the printer power off and wait for several seconds. Then, turn on the printer.

•Reboot the computer which sends the print jobs to the printer.

•Obtain and use the latest version of the printer driver. The latest versions of printer drivers and utilities are available at: http://www.kyoceramita.com/download/.

•Make sure that the procedures for printing are correctly followed in the application software. Consult the documentation supplied with the application software.

•If the printer prints garbage characters or stalls when the computer is turned on, particularly when the printer is connected to the computer under Windows 98 via the parallel port, rename device driver file drvwppqt.vxd. This file may be located in Windows\System\Iosubsys or Arcada\System folder. For technical details, visit Microsoft web site for the device driver.

4-2