Kyocera FS-C8008DN Selecting the Right Paper, Guidelines, Paper conditions, Paper composition

2.2 Selecting the Right Paper

2.2Selecting the Right Paper

To get clean, crisp printouts from laser printers all the time, select high-quality printer paper that meets the printer’s requirements. Laser printers use laser beams, electrostatic discharge, toner, and heat, all of which affect the paper. Furthermore, paper slide, bends, and twists as it passes through laser printers during printing. Therefore, printer paper must be able to withstand such great stress.

This section describes the major considerations for selecting the right printing paper.

2.2.1Guidelines

Paper conditions

Do not use paper with folded edges, curls, warps, smudges, tears, or embossing. Also do not use paper containing lint, clay, or paper debris. Using such paper may cause illegible printing, misfeeds, paper jams, etc., and shorten the product life of the printer. Never use paper with surface coating or other surface treatment. The paper surface should be as smooth and even as possible.

Paper composition

Do not use paper with surface-coating or containing plastic or carbon. The heat of fusing causes such paper to emit toxic fumes.

Bond paper should have at least an 80 % pulp content. The percentage of cotton and other fibers should not exceed 20 %.

Paper sizes

Table 2-3lists the standard paper sizes and dimensions. Note that certain paper sizes are available only for MP tray feeding (as remarked) and face-up tray delivering. For details on using MP tray, seeChapter 3 Using the Operator Panel, section 3.10.1 MP Tray Mode on page 3-69.

The dimensional tolerances for these paper sizes are ±0.7 mm (±0.0276 inches) for both length and width of paper. The corner angles must be 90 ±0.2 °.

MP tray	Size	Cassette or MP tray	Size
Monarch	3-7/8 ⋅ 7-1/2 inches	Ledger	11 ⋅ 17 inches
Business	4-1/8 ⋅ 9-1/2 inches	Legal	8-1/2 ⋅ 14 inches
Commercial #9	3-7/8 ⋅ 8-7/8 inches	Letter	8-1/2 ⋅ 11 inches
Commercial #6-3/4	3-5/8 ⋅ 6-1/2 inches	Executive	7-1/4⋅ 10-1/2 inches
ISO DL	110 ⋅ 220 mm	Folio	210 ⋅ 330 mm
ISO C5	162 ⋅ 229 mm	ISO A3	297 ⋅ 420 mm
ISO A6	105 ⋅ 148 mm	ISO A4	210 ⋅ 297 mm
JIS B6	128 ⋅ 182 mm	ISO A5	148 ⋅ 210 mm
ISO B5	176 ⋅ 250 mm	JIS B5	182 ⋅ 257 mm
A3 Wide	310 ⋅ 432 mm	JIS B4	257 ⋅ 364 mm

Table 2-3

2-4