Kyocera FS-C8008DN, FS-C8008N - page 76

3.4 e-MPS
3-31
10
1010
10 Press the MENU key. The display returns to Ready.
Maximum Space Assigned to Temporary Code Jobs
This changes the hard disk space that holds temporary code jobs. You can change the
maximum space from 0 to 9999 (megabytes). The actual maximum size depends on the size
of free hard disk space, however. The default size is 1/6 of the total hard disk space, rounded
off in unit of 50 MB. For example, if the total hard disk space is 10 GB, the default size is
1550 MB.
1
11
1Press the MENU key.
2
22
2Press the U or V key repeatedly until e-MPS > appears.
3
33
3Press the Z key.
4
44
4Press the U or V key repeatedly until >e-MPS Configuration > appears.
5
55
5Press the Z key.
6
66
6Press the U or V key repeatedly until >>Temp. Code JOB Size appears.
7
77
7To change the maximum disk space, press the ENTER key. A blinking cursor (_)
appears.
8
88
8Press the U or V key to increase or decrease, respectively, the value at the blinking
cursor. Use the Z and Y keys to move the cursor right and left.
9
99
9When the desired size is displayed, press the ENTER key.
10
1010
10 Press the MENU key. The display returns to Ready.
e-MPS >
>e-MPS >
Configuration
>>Temp. Code JOB
Size 1550MB
>>Temp. Code JOB
Size 1550MB