Kyocera FS-C8008DN, FS-C8008N - page 125

3.10 Paper Handling
3-80
6
66
6When the desired fuser mode is displayed, press the ENTER key. Proceed to the next
step.
Enabling or Disabling Duplex Printing for Custom Paper Type
This parameter is valid for the FS-C8008DN printer which is equipped with the duplexer as
a standard feature. When this parameter is disabled for a Custom type, the printer does not
duplex print when the custom size is selected for the paper type in a print job.
By default, duplex printing is enabled for custom paper types. To confirm and change this,
proceed as follows:
1
11
1Complete Step 3. above.
2
22
2Press the Z key.
3
33
3Press the U or V key repeatedly until >>Duplex Path appears.
4
44
4To change duplex printing, press the ENTER key. A blinking question mark (?)
appears.
5
55
5Press the U or V key to change from Enable to Disable.
6
66
6Press the ENTER key. The duplex printing capability is changed.
7
77
7To exit the menu selection, press the MENU key.
3.10.9 Resetting the Custom Paper Type
If you want to reset all custom paper type settings (1 to 8) to the factory default, proceed as
follows:
1
11
1Press the MENU key.
2
22
2Press the U or V key repeatedly until Paper Handling > appears.
3
33
3Press the Z key.
>>Duplex Path
Enable
>>Duplex Path
? Enable
Paper Handling >