Kyocera FS-C8008N, FS-C8008DN Rear, Air is purged through these vents to cool down the inside

1.2 Parts and Functions

1.2.3Rear

Figure 1-4

1Vents

Air is purged through these vents to cool down the inside.

2USB Interface Connector

This connector is a USB interface that conforms to the Full-Speed USB 2.0. Use a USB cable between this connector and the USB port on a computer.

3Memory Card Slot

This slot receives a memory card. A memory card can hold fonts, macros, forms, etc., that can be downloaded in the printer’s memory. For details, see Appendix A Options, section A.3.1 Memory Card on page A-7.

4Paper Feeder Right Cover

This cover is opened to clear paper jams in the paper feeder section.

5Network indicators

These indicators light according to the communication status with the network. 10BASE-T indicator (10): Lights when you are connected to the network at 10 Mbps. 100BASE-TX indicator (100): Lights when you are connected to network at 100 Mbps. Status indicator (ST): Flashes during data communication.

6Network Interface Connector

Connects to the network via a 10BASE-T/100BASE-TX network cable.

7Parallel Interface Connector

This connector is for a standard Centronics parallel interface cable from the computer. Connect this connector to the computer’s parallel port.

8Option Interface Card Slot (Network/Serial) [OPT]

This slot holds an optional network interface card for network printing or a serial interface board kit. (An optional Hard disk can’t be used in this slot.) For details see Appendix A Options.

1-9