Kyocera FS-C8008DN, FS-C8008N - page 134

3.13 Other Modes
3-89
6
66
6Press the U or V key. The display cycles through the available selection in the
following order:
English
Francais
Deutsch
Italiano
Nederlands
Espanol
Portuglls
7
77
7Press the ENTER key.
8
88
8Press the MENU key. The display returns to
Ready
.
3.13.2 Automatic Form Feed Timeout Setting
If the printer receives no data for a certain period, it will time out and release the current
interface. It prints whatever data it has in its buffer and feeds out the page. The default form
feed timeout time is 0 seconds. You can adjust the time-out time as follows:
1
11
1Press the MENU key.
2
22
2Press the U or V key repeatedly until Others > appears.
3
33
3Press the Z key.
4
44
4Press the U or V key repeatedly until >Form Feed Time Out appears.
5
55
5To change the timeout time, press the ENTER key. A blinking cursor (_) appears.
6
66
6Press the U or V key to increase or decrease the value at the blinking cursor and set
the desired time. The timeout time can be between 0 and 495 seconds, in 5-second
increments. Use the Z and Y keys to move the cursor right and left.
7
77
7When the desired timeout time is displayed, press the ENTER key.
8
88
8 To exit the menu selection, press the MENU key.
Others >
>Form Feed
Time Out 000sec.
>Form Feed
Time Out 000sec.