Using a Cellular Phone with this Unit
For assistance, please visit http://www.panasonic.com/phonehelp 55

Ringer settings for cellular calls

Important:
LYou must register your cellular phone to
the base unit before programming.
Ringer volume
You can change the ringer volume heard
when a cellular call is received.
1{MENU} (F6) i s i {SELECT}
2Ringer for celli {SELECT}
3Ringer volumei {SELECT}
4Select the desired volume. (Default:
High) i {SAVE} i {OFF}
Note:
LWhen the ringer volume is set to off for a
cellular line, the unit does not ring for
cellular calls.
Ringer tone
You can change the ringer tone heard
when a cellular call is received.
1{MENU} (F6) i s i {SELECT}
2Ringer for celli {SELECT}
3Ringer tonei {SELECT}
4Select the desired item. (Default: “Tone
3”) i {SAVE} i {OFF}
Note:
LIf you erase a customized ring for
cellular call, “Tone 3” (default) is used
instead of that ringer tone.

Transferring a cellular call

Cellular calls can be transferred between
this unit and the base unit, and between
this unit and another compatible
Panasonic unit (KX-THA11/KX-THA12/
KX-THA16/KX-THA17).
Transferring a cellular call
1During a cellular call, press
{INTERCOM} to put the call on hold.
2To page the base unit, press {0}.
To page the handset, enter its
extension number ({1} to {8}).
LIf you do not wish to announce the
transfer, skip to step 4.
3Wait for the paged party to answer.
4To complete the transfer, press {OFF}.
Note:
LIf the paged party does not answer
within 1 minute after you hang up, your
extension rings and the call is returned
to your phone. You can speak to the
caller again by pressing {s}.
LTo transfer a cellular call to the
answering system, see page 33.
Answering a transferred cellular call
Press {s} to answer the page.
LAfter the paging party hangs up the call,
you can take the transferred call.
Note:
LIf the paging party hangs up before you
answer the page, “Incoming call” is
displayed. Press {s} to take the
transferred call.
THA16.book Page 55 Thursday, March 9, 2006 6:43 PM