Printing
58 For assistance, please visit http://www.panasonic.com/phonehelp
Connecting to a computer
network
Important:
LMake sure that the base unit is
connected to your computer network.
1{MENU} (F6) i x i {SELECT}
2“Print settings” i {SELECT}
3“Network connect” i {SELECT}
LThe IP address and subnet mask are
displayed.
4Use the MULTI TALK V Printing Utility
to register the unit for printing. Refer to
“Registering the cordless video camera
station to the Printing Utility” in the
“Installation Guide for MULTI TALK V
Software” included with your base unit.
5{OFF}
Selecting a computer
Select a computer that is connected to the
printer you would like to use for printing.
The printer should be set as the default
printer for the computer.
Important:
LMake sure that the computer is turned
on, and that the base unit is connected
to the computer network.
1{MENU} (F6) i x i {SELECT}
2“Print settings” i {SELECT}
3“Select printer” i {SELECT}
4{CHANGE}
5Select the desired computer. i
{SAVE}
6{OFF}
Note:
LIf you change the computer’s network
interface (LAN card, wireless network
card, USB adaptor, etc.), you must
repeat the procedure above before you
can print again.
Using “Wake on LAN” (WOL)
When “Wake on LAN” (WOL) is enabled
on your computer and this unit, you can
remotely start up, or wake up your
computer from sleep or standby mode
when printing images from this unit. Set
the appropriate delay time (wake up time
for the computer).
Important:
LMake sure that your computer is WOL
compliant. For more information, consult
with your computer manufacturer.
LMake sure that you have already
selected the computer.
1{MENU} (F6) i x i {SELECT}
2“Print settings” i {SELECT}
3“Select printer” i {SELECT}
4{OPTION} i {1} (“On”) (Default:
“Off”) i {V}
5Enter the desired time. (Default: “120
seconds”)
LThe time between 30 and 999
seconds can be set.
6{SAVE} i {OFF}
Note:
LTo disable WOL on this unit, press {0}
(“Off”) in step 4, then press {SAVE}.
THA16.book Page 58 Thursday, March 9, 2006 6:43 PM