Useful Information
For assistance, please visit http://www.panasonic.com/phonehelp 69
Answering system
Battery recharge
The image sent from
another compatible
Panasonic unit (KX-
THA12/KX-THA13/KX-
THA16/KX-THA17) is
dark and difficult to see.
LAdjust the display brightness setting (page 39).
LThere is a strong sunlight or a backlight in the place
where the destination unit is located. Try shading the
camera’s location.
I cannot connect to
another compatible
Panasonic unit (KX-
THA12/KX-THA13/KX-
THA16/KX-THA17), the
image distorts, or the
image is slow.
LThe destination unit has lost communications with the
base unit. Move the destination unit closer to the base
unit, and try again.
LThere is an obstacle such as concrete wall. Move the
destination unit to the place without an obstacle.
LA microwave or wireless LAN appliance is in use. Move
the destination unit closer to the base unit or use the
destination unit away from those appliances, and try
again.
Camera detect” is
displayed.
LWhen you were paged from the cordless camera, you
were not near the unit and could not answer the page.
After you monitor the cordless camera which paged
you, the indication disappears.
Problem Cause & solution
I cannot operate the
answering system.
LAnother user is operating the answering system.
LIf other users are talking on a conference call, you
cannot operate the answering system. Try again later.
Problem Cause & solution
I charged the battery fully,
but 3 continues to
flash, or 4 is
displayed.
LThe battery may need to be replaced with a new one
(page 12).
The display is blank. LConfirm that the battery is properly installed.
LFully charge the battery (page 11).
Problem Cause & solution
THA16.book Page 69 Thursday, March 9, 2006 6:43 PM