Kyocera FS-C8008N, FS-C8008DN manual Selecting the Output Stack, Reset Type Adjust ?

3.10 Paper Handling

4 Press the U or V key repeatedly until >Reset Type Adjust appears.

>Reset Type

Adjust

5 To reset all custom paper types, press the ENTER key. A question mark (?) appears.

>Reset Type

Adjust ?

6	Press the ENTER key. All customized paper types, including weight and duplex
	printing capability, will be reset to the default. The display returns to Ready.

3.10.10 Selecting the Output Stack

The Stack Select menu on the operator panel allows you to select either the face-down tray or the face-up tray for the output stack. If an optional output device such as the sorter, document finisher, or bulk stacker, is installed, it can also be selected as an output stack.

1

2

3

4

Press the MENU key.

Press the U or V key repeatedly until Paper Handling > appears.

Paper Handling >

Press the Z key.

Press the U or V key repeatedly until >Stack Select appears.

>Stack Select Face-down tray

5		To change the output stack, press the ENTER key. A blinking question mark (?)
	appears.
			>Stack Select
		? Face-down tray
6	Press the U or V key to toggle through the following output stacks:
	Face-down tray
	Face-up tray

3-81