Kyocera FS-C8008DN manual Creating Custom Paper Types, Type Adjust Custom, Type Adjust ? Custom

3.10 Paper Handling

3.10.8Creating Custom Paper Types

The Type Adjust menu on the operator panel may be used to create a user-defined paper type for the printer. Custom paper types allow you to optimize printing parameters such as the fuser temperature best suited for the paper property. It also enables the printer to automatically select the paper cassette in which the custom paper is loaded as commanded by the printer driver

Up to eight custom user settings may be registered on the operator panel. Creating a custom paper type using the operator panel is a 4-step job:

•selecting one of eight custom setting positions (Custom 1 through 8)

•selecting the paper weight

•selecting the fuser temperature

•enabling or disabling duplexing for the paper type

Custom paper types can be reset afterwards by following the steps in Section 3.10.9

Resetting the Custom Paper Type on page 3-80.

Step 1. Selecting the Custom Type Position

1

2

3

4

Press the MENU key.

Press the U or V key repeatedly until Paper Handling > appears.

Paper Handling >

Press the Z key.

Press the U or V key repeatedly until >Type Adjust > appears.

>Type Adjust >

Custom 1

5	Press the ENTER key. A blinking question mark (?) appears.
			>Type Adjust
		? Custom 1
6	Press the U or V key to scroll to the other custom position.
	Custom 1

Custom 2

Custom 3

Custom 4

Custom 5

Custom 6

Custom 7

Custom 8

3-78