How to fill rinse aid |
| EN |
Rinse aid | H |
|
This product makes dishes sparkle and helps them to dry without |
| |
spotting. The dispenser is located on the inside panel of the door . |
|
|
When the low rinse aid indicator "H"on the control panel and the me- |
|
|
chanical indicator "H1" on the dispenser light, you must load rinse | I |
|
aid. | H1 |
|
Loading the rinse aid |
| |
|
| |
Regardless of the type of detergent dispenser installed on your appliance, |
|
|
you must proceed as indicated below when loading the rinse aid. |
|
|
To open the dispenser, turn the "1" cap in an | 1 | 2 |
and then pour in the rinse aid, making sure not to overfill. The amount of | ||
rinse aid used for each cycle can be regulated by turning the " 2" dose |
|
|
adjustor, located beneath the "1" cap, with a screwdriver. There are 6 |
|
|
different settings; the normal dosage setting is 3. |
|
|
Important
Proper dosage of the rinse aid improves drying. If drops of water remain on the dishes or spot- ting occurs, the dosage adjustor should be turned to a higher setting. If the dishes have white streaks, turn the dosage adjustor to a lower setting.
7
