EN
After 3 seconds the delayed start indicator “ E ” blinks, the
Cancelling or modifying a cycle
A cycle that is underway can be modified if it has only been running for a short time. Otherwise, the detergent may have already been used, and the appliance may have already drained the wash water. If this is the case, the detergent dispenser must be refilled ( see the paragraph entitled, “ Loading the detergent ”).
To modify a cycle that is already underway, follow the instructions contained in the paragraph entitled "Reset drain function", and select the programme you wish (see the paragraph entitled, "Switching the dishwasher ON").
"HALF LOAD" Button
This button (see"
To select "HALF LOAD":
Press the HALF LOAD load button “ D ” , HALF LOAD load indicator “ C ” lights.
Select the programme ( see the paragraph entitled“ Switching the dishwaher ON”) 
If the door is closed, after 3 seconds, the programme starts automatically.
-Please keep in mind that the amount of detergent should also be adapted to the HALF LOAD.
-To cancel the HALF LOAD , you can press the HALF LOAD button “ D ” again ,
until the HALF LOAD indicators “ C” goes out.
A C E H
B D F G I
J
Reset drain function
You can use Reset drain function to stop the washing cycle under running by Rotating the knob to "Reset ", and the appliance will stop after a few minutes drain phase.
15
