ClearOne comm AP400 operation manual Refsel, Preset

Appendices ~ Appendix E: Serial Commands

PP

This command changes or reports back the state of the phantom power for a microphone.

[DEVICE] PP <CH> <X>

63

REFSEL

This command selects or returns the output to be used as the EC Reference and PA (speaker output).

[DEVICE] REFSEL <X> <OUTPUT>

Explanation		Explanation
<CH>		<X>
CH= 1-4	Parameter to apply to the specified	X=1	Parameter to select the EC
	microphone channel		Reference and PA (speaker
CH= *	Parameter to apply command to all microphone		output)
	channels	X=2	Parameter to select the G-Link
<X>			EC Ref bus
X=0	Parameter to set the state to OFF	<OUTPUT>
X=1	Parameter to set the state to ON	OUTPUT=1-4	Parameter to select 1-4 as the
X=Null	Parameter to return the current state		EC reference and PA (speaker
			output)
Return Values		OUTPUT=A-D	Parameter to select A-D as the
The command will return the updated condition (On=1, Off=0) of			EC reference and PA (speaker
the phantom power in the same format as the command.			output)
		OUTPUT=E	Parameter to select G-Link EC
PRESET			Ref bus as the EC Reference and
			PA (speaker output)
This command selects or reports the current preset configuration		OUTPUT=F	Parameter to select none
		OUTPUT=Null	Parameter to return the EC
used by the AP400.
			reference and PA (speaker
[DEVICE] PRESET <X>			output) value

Explanation

<X>

X=1-6	Sets the preset to the number specified
X=Null	Parameter to return the current preset

Return Values

The command will return the current preset. If the command changed the preset, the updated preset is returned.

Return Values

The command will return the updated condition of the reference and PA (speaker output) select in the same format as the command.

Technical Services Group ~ 1-800-283-5936 (USA) ~ 1-801-974-3760