64 | Appendices ~ Appendix E: Serial Commands |
RING
This command reports the presence of a ring on the Telco port. (This is an indication only.)
[DEVICE] RING Return Value
The Ring is sent if a valid ring has been sensed on the Telco line: [DEVICE] RING
RXRD
This command controls or reports the Receive Reduction control of the unit.
[DEVICE] RXRD <X>
Explanation
<X>
X=0 | Parameter to set Receive Reduction to OFF |
X=1 | Parameter to set Receive Reduction to ON |
X=2 | Parameter to toggle the current state |
X=Null | Parameter to report back the current state |
Return Values
The command returns the updated connection state of the unit in the same format as the command.
TAMODE
This command controls or reports the Telephone Adapt Mode control of the unit.
[DEVICE] TAMODE <X>
Explanation
<X>
X=0 | Parameter to set Telephone Adapt Mode to |
| Auto |
X=1 | Parameter to set Telephone Adapt Mode to |
| Burst |
X=Null | Parameter to report back the current state |
Return Values
The command returns the updated connection state of the unit in the same format as the command.
TE
This command controls or reports the connection status of the unit.
[DEVICE] TE <X>
Explanation
<X>
X=0 | Parameter to set the unit to disconnect from |
| the line |
X=1 | Parameter to set the unit to connect to the |
| line |
X=2 | Parameter to toggle the state from one state |
| to the other |
X=Null | Parameter to report back the current state |
Return Value
If the current state is ON, the following is returned out the serial port: [DEVICE] TE 1
If the current state is OFF, the following is returned out the serial port: [DEVICE] TE 0
