Appendices ~ Appendix E: Serial Commands
FLOW
This command selects or reports whether hardware flow control is enable or disabled for the AP400. Hardware flow control is implemented using RTS and CTS.
[DEVICE] FLOW <X>
Explanation
<X>
X=0 | Sets flow control to OFF |
X=1 | Sets flow control to ON |
X=Null | Parameter to return the current mode |
Return Values
The command will return the updated condition (On=1, Off=0) of the AP400 in the same format as the command.
FMP
This command selects or returns the current status of the first microphone priority mode for the AP400.
[DEVICE] FMP <X>
Explanation
<X>
X=0 | Parameter to select first microphone priority |
| mode to OFF |
X=1 | Parameter to select first microphone priority |
| mode to ON |
X=Null | Parameter to return the current mode |
Return Values
The command will return the updated condition (On=1, Off=0) of first mic priority mode in the same format as the command.
51
FPP
This command sets and reports the current passcode setting for the AP400.
[DEVICE] FPP <XXXXX>
Explanation
<XXXXX>
X=1 | ▲ button |
X=2 | Enter button |
X=3 | Esc button |
X=4 | ▼ button |
X=5 | Meter button |
X=6 | Input button |
X=7 | System button |
X=8 | Output button |
X=9 | Routing button |
X=Null | Parameter to return current passcode |
Return Values
The command returns the current or updated condition of the front panel passcode.
