60 | Appendices ~ Appendix E: Serial Commands |
NOM
This command changes or reports back state of NOM attenuation for each channel.
[DEVICE] NOM <CH> <X>
Explanation
<CH>
CH=
CH=
<X> |
|
X=0 | Parameter to set NOM attenuation to OFF |
X=1 | Parameter to set NOM attenuation to ON |
X=Null | Parameter to return the current state of |
| NOM attenuation |
OFFA
This command changes or reports back the setting of off attenuation.
[DEVICE] OFFA <X>
Explanation
<X>
X=Null Parameter to return the current value of off attenuation
Return Values
The command will return the updated value of off attenuation in the same format as the command.
Return Values
The command will return the updated condition (On=1, Off=0) of NOM attenuation for the selected channel in the same format as the command.
NULL
This command sends a short noise burst down the telephone line and forces the AP400 to adapt to the telephone line.
[DEVICE] NULL
PAA
This command selects or returns the current status of the PA adaptive mode.
[DEVICE] PAA <X>
Explanation
<X>
X=0 | Parameter to select PA adaptive mode to OFF |
X=1 | Parameter to select PA adaptive mode to ON |
X=Null | Parameter to return the current mode |
Return Values
If the NULL succeeds, the following is returned out the serial port: [DEVICE] NULL
If the NULL fails, the following is returned out the serial port:
[DEVICE] NULL
Return Values
The command will return the updated condition (On=1, Off=0) of the PA adaptive mode in the same format as the command.
