
58 | Appendices ~ Appendix E: Serial Commands |
<OUTPUTMIX> |
|
OUTPUTMIX=hex word | The selected input will be routed to |
| the outputs indicated. |
OUTPUTMIX=null | Mix Command to return the current |
| setting for the input. |
<OUTPUTMIX>Note:
When entering the hex value of the <OUTPUTMIX>, it is not necessary to add the leading zeros, only zeros that follow the value, as in examples 1 & 2, below.
Example 1
The following command routes Pregate Mic Input 1 audio to Output 1. This command applies only to the box the serial cable connects to, since a device is not specified.
Example 1. OUTPUTMIX matrix #34 MTRX 18 1
Example 2
The following command routes Mic Input 1 Post Gate audio to
Outputs A, B, and C, and to the
Example 2. OUTPUTMIX matrix
MTRX 1 4700
Return Values
The command will return the updated condition of the matrix for the selected input in the same format as the command was issued.