Kyocera FS-C8008DN manual Duplex Printing Error Detection Setting, Finishing Error, Duplex Off

3.13 Other Modes

3.13.10 Duplex Printing Error Detection Setting

If the error detection setting for duplex printing has been turned On, and you attempt to print onto a paper size and paper type that cannot be used for duplex printing, the Duplex disabled Press GO error message will be displayed and printing will stop. To print onto one-side of the paper only when this message is displayed, press the GO key. The default setting is Off.

1

2

3

4

Press the MENU key.

Press the U or V key repeatedly until Others > appears.

Others >

Press the Z key.

Press the U or V key repeatedly until >Finishing Error > appears.

>Finishing > Error

5 Press the Z key and display >>Duplex.

>>Duplex Off

6 Press the ENTER key. A blinking question mark (?) appears.

>>Duplex ? Off

7 Press the U or V key to change Off to On.

>>Duplex ? On

8

9

Press the ENTER key.

To exit the menu selection, press the MENU key.

3-98