ETA Systems Flow Meter FC01-LQ Quitting the parameter selection menu, Error LS1 OUT of Range

Flow Meter FC01-LQ

6.5 Quitting the parameter selection menu

Before the parameter selection menu can be quitted, the controller will conduct a plausibility check of the data entered.

“PARAMETERS OK!” is indicated when the data are found to be correct. The menu may then be

quitted by pressing M MODE.

Errors found during the plausibility check are indicated in the following sequence of priority. Priority of entry errors in the PARAMETER SELECTION menu:

•	ERROR LS1	OUT OF RANGE
	switch-on and/or switch-off value for limit switch 1 outside measuring		range
•	ERROR LS2	OUT OF RANGE
	switch-on and/or switch-off value for limit switch 2 outside measuring		range
•	ERROR LS1	ON = OFF
	switch-on value for limit switch 1 equals switch-off value for limit switch 1
•	ERROR LS2	ON = OFF
	switch-on value for limit switch 2 equals switch-off value for limit switch 2

The menu can only be quitted after correction of the error(s). To do this, return to the beginning of the parameter selection menu by pressing ▲ UP or ▼ DOWN and select the menu option with the incorrect entry for correction.

An overview of the parameter selection menu is shown on the following page.

Parameter selection 43