Kyocera FS-C8008N Memory, Information, Installed Options, Network Status, Emulation, Error Log

3.3 Menu Map and Status Pages

3Memory

This item shows:

•Standard memory in the printer (128 MB)

•Option memory slot status (Slots 1 and 2) in megabytes

•Total memory in the printer

•Current status of the RAM disk

4Page Information

This item shows the page related items:

•Tone mode, Normal or Fine

•Number of copies, from 1 to 999

•Total page count

5Installed Options

This item shows the options installed in the printer:

•Hard disk

•Option ROM

•Memory card

6Network Status

This item shows the IP address, subnet mask address, and default gateway address for the network interface card in the printer.

7Emulation

This item shows all available emulations of the printer. The PCL 6 emulation is set as default when the printer is shipped from the factory. The emulations are:

•PCL 6

•KPDL3

•KC-GL

8Error Log

This item shows the last three instances of the following types of errors, listing them in the order of occurrence:

•KPDL (PostScript) errors

•Memory overflow

•Print overrun

•File-not-found

The most recent error is displayed on the topmost line of Error Log. Error information is cleared when the printer is powered off.

The error log information is intended for service purpose.

9Consumable Status

This item shows the approximate level of remaining toner. When the value is 100, the toner container is full. The closer to 0, the smaller the amount of remaining toner.

10Interface Information

This information shows the emulation and the default font for all interfaces installed in the printer.

3-19