Installing the Phone

Installing the Handset Battery

NOTE: You must connect the handset battery before using the cordless handsets.

CAUTION: To reduce the risk of fire or personal injury, use only the Thomson Inc. appoved Nickel Metal Hydride (Ni-MH) battery model 5-2721, which is compatible with this unit.

1.Locate battery and battery door which are packaged together inside a plastic bag and are separate from the handset.

2.Locate the battery compartment on the back of the handset.

3.Plug the battery pack cord into the jack inside the compartment.

NOTE: It is important to maintain the polarity (black and red wires) to the jack inside the compartment. To ensure proper battery installation, the connector is keyed and can be inserted only one way.

4. Insert the battery pack.

5.Close the battery compartment by pushing the door up until it snaps into place.

6.Place the handsets in the charging cradles.

Allow handsets to charge for 16 hours prior to first use. If you don’t properly charge the handsets, battery performance is compromised.

12

Page 12
Image 12
GE 28165xx3, 28165xx6, 28166, 28165xx2, 28165xx5, 28165xx4, 0007634 manual Installing the Phone, Installing the Handset Battery