Three-Way calling
Between two handsets or a handset and base and an external call
1.During an external call, press the int button on the handset or base and the external call is placed on hold. The list of handsets or base show in the display.
2.Use the 5 or 6 button to select desired handset or base. A tone sounds and PAGING shows in the originating handset or base display.
NOTE: PAGING FROM… shows in the display on the receiving handset or base, and the receiving handset or base must press the int button or the OK (SKL) to answer the intercom.
3.When the receiving handset or base connects, press the UNHOLD (SKR) on the originating handset or base to conference with the receiving handset or base and the external caller. CONFERENCE shows in the display on the originating and receiving handsets.
NOTE: A handset or base can enter conference mode directly by pressing the LINE 1 or LINE 2 button on the second handset or base during a call.
Between a handset or base and external calls on the Line 1 and Line 2
1.During an external call on either LINE 1 or LINE 2, press the HOLD (SKR) to put the call on hold.
2.If the originating line is LINE 1, press the LINE 2 button. LINE 1 icon flashes and LINE 2 icon shows in the display steadily.
3.Press the CONF button to conference with the external call.
Transferring External Call to Other Handsets or Base
During an external call, you may transfer the external call to another handset or base.
1.Press the int button on the originating handset or base to put an external call on hold, and then page the receiving handset or base.
2.The list of handsets or base shows in the display. Use the 5 or 6 button to select desired handset or base.
3.Press the SELECT (SKL) to start the page. You will hear a paging tone. PAGING shows on the originating handset’s display or base display, and PAGING FROM…. shows on the receiving handset’s display or base display.
4.When the receiving handset connects, press the END/CANCEL button on the originating handset or base to transfer the call.
-OR -
Press the END/CANCEL button on the originating handset or base to transfer the call.
35
