Manuals / GE / Communications / Cordless Telephone

GE 28165xx6, 28166 manual Base Speakerphone Set Up, Wall Mounting the Base, Speakerphone Volume

Models: 28165xx2 8165 28166 28165xx5 0007634 28165 28165xx6 28165xx4 28165xx3

1 60

Download 60 pages 44.22 Kb

Page 14

Wall Mounting the Base

1.Turn the base over.

2.Slide the pedestal into the slots on the bottom of the base, and then push the pedestal down until it snaps into place.

3.Slip the mounting holes on the pedestal over the wall plate posts and firmly slide the unit into place. (Wall plate not included.)

Base Speakerphone Set Up

NOTE: Changing menu settings on the base will only change the settings on the base and changing menu settings on the handset will only change settings on the handset. For example, if you change the language on the handset, it will not change the language on the base.

Speakerphone Volume

Use the VOLUME (5 or 6) buttons to adjust the speaker volume on the base to a comfortable level during a call OR press the LINE 1 or LINE 2 button on the base and then adjust the volume. VOL -1 is the minimum level and VOL-9 is the maximum.

Using the Soft Keys

On the base, there are two buttons under the display box which represent several Soft Key (programmable) functions. Use these buttons to activate the Soft Key icons that appear in the display. You may program the following items with the Soft Keys: Caller ID, Ringer, Base Name, Date/Time, Set Language, Tone/Pulse, Room Monitor, Local Area Code and Answerer Setup.

NOTE: During programming, you may press the END/CANCEL button at any time to exit.

Turning the Answerer(s) On or Off

NOTE: The Mailbox Answerer(s) must be ON to hear the voice prompts.

1.Make sure your phone is OFF (not in TALK mode).

2.Press the MENU (SKR) to go to the main menu.

3.Use the 5 or 6 buttons to scroll to ANSWERER SETUP.

4.Press the SELECT (SKL) to confirm.

5.Use the 5 or 6 buttons to select MAILBOX 1 or MAILBOX 2 for setting Mailbox 1 or Mailbox 2.

6.Press the SELECT (SKL) to confirm.

7.Use the 5 or 6buttons to scroll to ANSWER ON/OFF.

8.Press the SELECT (SKL) to enter the menu. ANSWER ON/ANSWER OFF shows in display.

14

Image 14

GE 28165xx6, 28166, 28165xx3 Base Speakerphone Set Up, Wall Mounting the Base, Speakerphone Volume, Using the Soft Keys

Contents

Page Equipment Approval Information Notification to the Local Telephone Company Licensing Interference InformationHearing Aid Compatibility HAC FCC RF Radiation Exposure Statement Information for Dect Product Table of Contents Base Speakerphone Introduction Telephone Jack Requirements Parts ChecklistBefore You Begin Digital Security System InstallationImportant Installation Guidelines Handset Layout Base Layout Tone Installing the Phone Installing the Handset Battery Connecting the Base Station Installing the Base StationInstalling the Backup Batteries on Base Unit Using the Soft Keys Base Speakerphone Set UpSpeakerphone Volume Wall Mounting the Base Base Voice/Display Prompt Language Base Name Time Format Base Date/TimeSet Date/Time Date Format Base Ringers Tone/PulseBase Set Local Area Codes Base VIP Melody Tone Base Ringer VolumeBase Ringer Tone From the Ringer Menu Answer ON/OFF Answerer SetupBase Key Tone Recording the Outgoing Announcement Outgoing AnnouncementReviewing the Outgoing Announcement Changing the Outgoing Announcement Forwarding Messages Base Rings To AnswerSecurity Code Set Forwarding Messages Number of Retries Forwarding Messages ON/OFFView Unit ID Messages Handset Telephone Set UpHandset Display Prompt Language Delete Caller ID Caller IDReceiving Caller ID Storing Caller ID Handset Ringer Tone Handset Ringer VolumeHandset Ringers Handset Key Tone Handset RegistrationHandset VIP Melody Handset Name Handset Date/Time Language Room Monitor Basic Operation Handset Setting Local Area CodesCharge/In Use Indicator Answering a Call Number Redial VolumeFlash Mute Global De-registration HoldPaging the Cordless Handset Call Transfer Making an Intercom Call Intercom OperationPush to Talk Receiving an Intercom Call Advanced Intercom FeaturesUsing Intercom with External Telephone Calls Receiving an Incoming Call During an Intercom Call Three-Way calling Transferring External Call to Other Handsets or Base Receiving CID Records Caller ID CIDCall Waiting Caller ID Dialing a Caller ID Number Storing CID Records In CID MemoryReviewing Call Records Storing CID Records in Internal Memory Number of digits Explanation Example Storing a Name and Number in Memory MemoryDeleting CID Records Reviewing a Stored Number Storing the Last Number DialedInserting a Pause in the Dialing Sequence Dialing a Number from Memory Changing a Stored NumberDeleting Records Stored in Memory Transferring memory from the base to a handset Transferring MemoryChain Dialing from Memory Transferring memory from the handset to the base Screening Calls from the Base Handset Messages IndicatorAnswering System Operation Message Playback Handset Memory FullErasing Messages To erase one message at a time from the base To erase a message from the handset Remote AccessLeaving a Memo Belt Clip and Optional Headset Connecting the Belt ClipConnecting an Optional Headset to the Handset Changing the Battery Battery Safety Precautions Handset Sound Signals Display Messages Telephone Solutions Troubleshooting GuideCaller ID Solutions Battery Solutions Answering System Solutions General Product Care Causes of Poor Reception Warranty Assistance Thomson Inc Manager, Consumer Relations Box Indianapolis, Limited Warranty For how long after your purchase If you purchased your product outside the USA Accessory Information Description Model no Index Handset Date/Time Number Redial Thomson Inc