

6. Press the DONE (SKL) to conrm.
Forwarding Messages ON/OFF
From the Answerer Setup Menu:
1. Use the 5 or 6 buttons to scroll to FORWARD MSG.
. Press the SELECT (SKL) to enter the menu.
3. Use the 5 or 6 buttons to scroll to FORWARD ON/OFF.
4. Press the SELECT (SKL) to enter the menu. ON OFF shows in display.
5. Use the5 or 6 buttons to select ON or OFF.
6. Press the SELECT (SKL) to conrm.
7. To activate setting, press the MEMO button on the base. FW ANS shows in the display.
NOTE: Apart from enabling the message forward through the menu,
you have to press the
MEMO
button on base to activate the Message
Forwarding function. Also, the Message Forwarding must be activated
for each line, for example if Line 1 is set to Off and Line 2 is set to On,
when the
MEMO
button is pressed only Line 2 will have the Message
Forward function activated. F ANS1ON/2ON shows in the display if both
lines are activated. If only Line 1 is activated, F ANS1ON/2OFF shows in
the display.
View Unit ID
The unit's identication code number is for reference purposes only.
Number of Retries
If the line of desired number is busy, answerer will continue to try to forward the
messages again (up to three times, depending on selection) at a later time.
From the Answerer Setup Menu:
1. Use the 5 or 6 buttons to scroll to FORWARD MSG.
. Press the SELECT (SKL) to enter the menu.
3. Use the 5 or 6buttons to scroll to NUM OF RETRIES.
4. Press the SELECT (SKL) to enter the menu.
5. Use the 5 or 6 buttons to select 0, 1, 2 or 3.
6. Press the SELECT (SKL) to conrm.