Xerox manual Installing the Fax Sharing Client Manually

		Installing WinFax for Fax Sharing (Administrators Only)
	Result Code	Meaning
-10		Data type is invalid.
-11		Unknown error during setup.
-12		Dialogs are out of order.
-51		Cannot create the specified folder.
-52		Cannot access the specified folder.
-53		Invalid option selected.

Installing the Fax Sharing Client Manually

If you do not have a modem or communications device attached to your WinFax station, but another WinFax station on your Fax Sharing network has an attached modem or device and is configured as a Fax Sharing Host, you can use that modem or device as if it were attached to your WinFax station. To do so, you must install WinFax on your computer as a Fax Sharing Client and connect to the appropriate Fax Sharing Host.

The Setup program guides you through the installation process by prompting you for information and automatically determining your system configuration, modem or device setup, COM port location, and available disk space.

Note: To install WinFax under Windows NT/2000, your Windows NT/2000 account must have administrative privileges.

To install WinFax on a client computer:

1Obtain the following information from your system administrator:

3the name of the Fax Sharing Host station on your network

if your Fax Sharing Host station is running under Windows NT/ 2000, verify that you have an account set up on the Fax Sharing Host station (you cannot install or use Fax Sharing Client unless

3you have an account)

the password for the Fax Sharing Host station, if one exists

2Click the Windows Start button, and then click Run. The Run dialog appears.

3In the Open field, type ...

<drive and path>\SETUP.EXE

21