Installing the Processor Fan/Heat Sink Assembly

NOTICE: When reinstalling the fan, ensure that you do not pinch the wires that run between the system board and the fan.

1Align the captive screws on the processor fan/heat sink assembly to the four metal screw hole projections on the system board.

1

1processor fan/heat sink assembly

NOTE: The processor fan/heat sink assembly in your computer may not look exactly like the one shown in the illustration above.

2Tighten the four captive screws.

NOTE: Ensure that the processor fan/heat sink assembly is correctly seated and secure.

3Connect the processor fan/heat sink assembly cable to the CPU_FAN system board connector (see "Inside View of Your Computer" on page 109).

4Replace the computer cover (see "Replacing the Computer Cover" on page 176).

5Connect your computer and devices to an electrical outlet, and turn them on.

Removing and Installing Parts

167

Page 167
Image 167
Dell 530d, KP338, 530b, 530c owner manual Installing the Processor Fan/Heat Sink Assembly, 167