1
2
3 4
5
6
1 | alignment guide | 2 | filler bracket | 3 | alignment bar |
4 | card retention bracket | 5 | guide clamp (2) | 6 | guide notch (2) |
12Fix the card retention bracket by replacing and tightening the screw.
13Connect any cables that should be attached to the card.
See the documentation for the card for information about the card’s cable connections.
NOTICE: Do not route card cables over or behind the cards. Cables routed over the cards can prevent the computer cover from closing properly or cause damage to the equipment.
Removing and Installing Parts
