3Check the documentation for the drive to verify that it is configured for your computer.
4Slide the second hard drive into the second hard drive bay.
5Align the screw holes in the second hard drive with the screw holes in the second hard drive bay.
| 1 | 6 |
|
| |
2 |
| 5 |
|
|
3 
4
1 | second hard drive | 2 | serial ATA data cable | 3 | power cable |
| (optional) |
|
|
|
|
4 | system board | 5 | screw holes in the hard | 6 | screws (4) |
| connector |
| drive bay (4) |
|
|
6Replace and tighten the four screws to secure the hard drive.
7Connect the power and data cables to the drive.
144
