6Remove the two screws securing the CD/DVD drive.
7Slide the CD/DVD drive out through the front of the computer.
8If you are not replacing the drive, replace the drive panel insert (see "Replacing the Drive Panel Insert" on page 150).
9Replace the drive panel (see "Drives" on page 138).
10Replace the bezel (see "Replacing the Bezel" on page 137).
11Replace the computer cover (see "Replacing the Computer Cover" on page 176).
12Connect your computer and devices to electrical outlets, and then turn them on.
13Configure the drives in system setup (see "Entering System Setup" on page 188).
Installing a CD/DVD Drive
1Follow the procedures in "Before You Begin" on page 105.
2Remove the computer cover (see "Removing the Computer Cover" on page 107).
3Remove the bezel (see "Removing the Bezel" on page 136).
4Gently slide the drive into place.
5Align the screw holes in the CD/DVD drive with the screw holes in the CD/DVD drive bay.
6Replace and tighten the two screws securing the CD/DVD drive.
7Connect the power and data cables to the drive.
8Connect the data cable to the system board connector on the system board.
