2 Focus on the subject by depressing the shutter button halfway down.

The focus is locked at the first picture and remains locked until 3 pictures are taken.

Take 3 consecutive pictures, depress and hold down the shutter release button.

MEMO

If you take a finger off from the shutter release button during auto bracketing, the auto bracketing mode will remain effective for about 20 seconds. After that, the auto bracketing exposure for the first bracketed frame will take effect.

Auto bracket does not work in the Bulb timer Mode.

If the exposure compensation amount is small, the effect will not be noticeable with print film.

Only the amount of light of the flash can be changed continuously by using the auto bracketing mode following completion of charging of the built-in flash or external flash unit (TTL and P-TTL Auto only). However, in case of an external flash unit, if three consecutive frames are taken while depressing the shutter button, the second and third frame may be taken prior to completion of charging. Always make sure to check completion of charging for each time.

How to cancel

Auto bracket can be canceled if the power is turned OFF or any other drive mode is set.

53

BASIC OPERATION

(PREPARATION)

BASIC OPERATION

(SHOOTING)

ADVANCED OPERATIONS

 

OTHERS

Page 55
Image 55
Pentax MZ-60 manual How to cancel