82

MANUAL POP UP THE BUILT-IN FLASH

1 Push the flash pop-up button to activate the flash.

will disappear on the LCD panel.

2

3

4

appears in the viewfinder and on the LCD panel when the flash is fully charged.

Depress the shutter release button fully, and the flash unit discharges.

After using the Built –in flash, push down the flash head to lock it in the closed position.

MEMO

The built-in flash does not pop up even if the flash pop-up button is depressed

with the flash mode is set to .

This mode can be used with the red-eye reduction together.

When the flash pop up button is depressed, is disappeared from the LCD pane if auto flash mode was set, and the flash is always discharged even if the subject is not required flash light.

The shutter cannot be released until the flash is fully charged.

Page 84
Image 84
Pentax MZ-60 manual Manual POP UP the BUILT-IN Flash