SETTING THE FILM SPEED (ISO) MANUALLY

This camera automatically reads the film speed from the film's DX code. However, the film speed setting can be changed. If you use a non-DX coded film, set the film speed manually.

How to set

1 1. Load the Non-DX corded film.

Move the select dial until appears on the LCD

panel while depressing the exposure mode button.

2 Move the select dial to set ISO film speed displayed on the LCD panel.

After the ISO is set, move the select dial until the your desired exposure mode other than ISO.

MEMO

To change the ISO, turn the select dial to the left for a smaller number (Slower film speed, or right for a larger number (Faster film speed).

The shutter cannot be released when is displayed on LCD.

is displayed when the film speed is set manually.

77

BASIC OPERATION

(PREPARATION)

BASIC OPERATION

(SHOOTING)

ADVANCED OPERATIONS

 

OTHERS

 

Page 79
Image 79
Pentax MZ-60 manual Setting the Film Speed ISO Manually, How to set