4 Move the Select dial to right or left to change the digits that

you wish to change the blinking digits.

The digits increase by one each time the select dial is moved to

right and the digits decreased by it’s moved to left.

Holding the select dial for about one second will change the digits rapidly.

5 After the data has been changed, depress the [DATE] button each time until blinking stops.

6 Depress the [DATE] button to select your date mode that you wish to imprint on your pictures.

MEMO

Depress the [DATE] button in synchronize with a time signal to set the second to zero while ( : ) is blinking.

Operational precautions

The working temperature for data printing is 0°C – 50°C (32F – 122F).

Use DX-coded films with ISO rating from 25 – 5000.

If high-speed film with an ISO rating of1000 or faster is used, the imprinted characters may blur.

If film with ISO rating of 50 or slower is used, the printed characters may be dark or dim.

If you release the shutter while the blinking data is being corrected, the data cannot be imprinted.

25

BASIC OPERATION

(PREPARATION)

BASIC OPERATION

(SHOOTING)

ADVANCED OPERATIONS

 

OTHERS

 

Page 27
Image 27
Pentax MZ-60 manual Operational precautions