Pentax MZ-60 manual Troubleshooting

106

TROUBLESHOOTING

What appears troublesome may be easily remedied. Here are some problems that may occur and their remedies. Before contacting a Pentax service center, check the following items.

Symptoms		Causes					Remedies	Reference
The shutter does not	The lens aperture ring is set			Set the lens aperture ring to				P.24,
release	to other than the		position.	the		position.		P.48
	The main switch is [OFF].			Turn the main switch ON.				P.16
	The low battery warning			Replace the battery.				P.12
	is blinking.
	The batteries are installed			Install the batteries properly.				P.12
	bakwards.
		is displayed on the LCD		Set the exposure mode to				P56,
	panel.			other position.				P64
	The built-in flash is being			Wait until the flash is fully				P.34
	charged.			charged.
Nothing is displayed	The main switch is [OFF].			Turn the main switch ON.				P.16
on the LCD panel.
	No battery has been			Install the batteries.				P.12
	installed.
	The batteries are installed			Install the batteries properly.				P.12
	backwards.
	The battery is dead.			Replace the batteries.				P.12
The Autofocus does	AF frame is not placed over			Move the camera until the AF				P.30
not work.	the subject.			frame			covers the subject.
	The subject is too close.			Increase the camera-to-				P.30
				subject distance.
	The focus mode is set to			Set the focus mode switch to				P.27
		.			.
	The subject is difficult to			Focus manually by using the				P.60
	autofocus.			matte field.