HP Host Explorer Software, Host Explorer Software E-Media Kit, Host Explorer Software Media Kit 4.1 Overview, 4.2 Verifying the 3PAR Host Explorer Package is Installed, 4.3Verifying the 3PAR Host Explorer Process is Running, TpdHostAgent stop

3PAR Host Explorer User’s Guide

4.1 Overview

The chapter provides instructions for using the 3PAR Host Explorer.

4.2 Verifying the 3PAR Host Explorer Package is Installed

To verify that the 3PAR Host Explorer package has been installed correctly, see the appropriate section below:

■To find out if the product is installed on a Solaris system, see Verifying the Installation on Solaris Sparc Systems on page 3.4.

■To find out if the product is installed on a Linux system, see Verifying the Installation on Red Hat Linux Systems on page 3.4.

■To find out if the product is installed on a Windows system, see: Verifying the Installation on Microsoft Windows Server on page 3.3.

4.3Verifying the 3PAR Host Explorer Process is Running

XTo verify that the 3PAR Host Explorer process is running, issue the TpdHostAgent status command.

Example output:

Printing the status of 3PAR Host Explorer daemon: 3PAR Host Explorer is running..

The current time interval values are: Value is PushInterval=86400 Å default Value is RefreshInterval=60 Å default

4.4 Stopping the 3PAR Host Explorer Process

By default, the Host Explorer process starts at every reboot of the host.

XIf you do not want the process running on the host, issue the TpdHostAgent stop command.

4.2 Overview