6.0INFANT RESTRAINT

6.2 For the 5-Point Harness

•Type A: Put the two buckle tongues together, overlaying the left buckle tongue onto the right buckle tongue, and insert the two joined buckle tongues into the harness buckle on the crotch strap (Fig. 36-1). Type B: Insert each buckle tongue into the harness buckle

(Fig. 36-2).

Fig. 36-1

Make sure that you hear the tongues click

 

into the buckle and check that both are firmly

 

latched by pulling upward on the straps. If

 

the harness straps are not securely buckled,

 

the safety seat will NOT provide protection

 

for your child. DO NOT use the safety seat,

 

even as a carrier, if the harness does not

 

securely buckle. Please call Baby Trend at

Fig. 36-2

1-800-328-7363 for assistance.

•From the front of the Safety Seat, pull outward on the Harness

Adjuster Strap to tighten the Harness Straps. Make sure that both

Harness Straps are flat and snug on your child’s shoulders. A snug strap should not allow any slack. It lies in a relatively straight line without sagging. It does not press on the child’s flesh or push the child’s body into an unnatural position.

•Fasten the Harness Chest Clips together. Position the Harness

Chest Clip, by sliding the Clip either up or down on the Harness Straps, so that it is level with the child’s armpits.

7.0INSTALLATION

Accessory products for use with the Safety Seat are acceptable for use provided that they do not interfere with the harness assembly, or the proper adjustment of the harness such that it remains tight on the child’s shoulders at all times. Thick, soft, or other compressible material in excess of 1/4 inch thick should not be placed behind or under the child or between the child and harness straps. Examples of accessory products are head support pillows or rolled blankets to add additional head support.

SECURING THE SAFETY SEAT OR BASE IN THE VEHICLE

Please read carefully section 4.3, Check that the Vehicle Seat Belt is Safe to Use, before proceeding with the installation of the Safety Seat. Please understand that due to the extremely large number of vehicles in use today, and the correspondingly large number of safety belt systems, this section can only provide guidance, as to the proper installation of the Safety Seat, that must be combined with the information provided by your vehicle manufacturer in order to obtain a proper and safe installation.

WARNING

Failure to properly install and secure the Safety Seat in a rear facing position within the vehicle increases the child’s risk of death or serious injury in the event of a sharp turn, sudden stop or crash. Carefully follow these instructions, and the instructions provided by your vehicle manufacturer for the installation of child safety seats, to ensure that the Safety Seat is properly located, positioned and held tightly installed at all times.

36

 

37

 

Page 18 Page 20
Page 19
Image 19
Baby Trend E30FL0211U, CS0190B0211 Installation, Securing the Safety Seat or Base in the Vehicle, For the 5-Point Harness
Page 18 Page 20

E30FL0211U, CS0190B0211 specifications

The Baby Trend CS0190B0211 and E30FL0211U are innovative travel systems designed to provide parents with convenience, safety, and comfort while transporting their little ones. These models stand out due to their thoughtful engineering, modern features, and user-friendly design.

One of the main features of the Baby Trend CS0190B0211 is its compatibility with infant car seats, allowing for a seamless transition from car to stroller. This travel system includes an easy-to-install infant car seat that has undergone stringent safety testing. The car seat boasts a adjustable five-point safety harness that ensures your baby is securely fastened during travel, providing peace of mind for parents on the go.

The stroller included in this system is designed for versatility and comfort. With a multi-position reclining seat, it can accommodate newborns and older infants alike, making it a practical option for those in varying stages of development. The stroller features a large canopy that offers UV protection and creates a sheltered environment, ideal for sunny or rainy days.

The E30FL0211U model introduces advanced technologies designed to enhance usability. It incorporates a one-hand fold mechanism, allowing parents to collapse the stroller effortlessly, which is particularly beneficial when handling bags or other items with one arm. The lightweight frame ensures easy maneuverability, while the front swivel wheels improve navigation in tight spaces.

An additional characteristic of both models is the generous storage basket located beneath the stroller. This spacious area allows parents to carry essential items such as diapers, wipes, and personal belongings, keeping everything within easy reach. The handle is designed for a comfortable grip, making long walks easier on the hands.

Safety is a priority for Baby Trend, and both travel systems feature effective braking systems that ensure the stroller remains in place during use. The materials used in production are also selected with the well-being of both the child and environment in mind, ensuring durability and comfort.

In conclusion, the Baby Trend CS0190B0211 and E30FL0211U travel systems provide exceptional features and technologies designed to make parenting more manageable. With safety as a cornerstone, these models combine convenience with thoughtful design, making them a preferred choice for modern families seeking functionality in their travel gear.
Top Page Image Contents