3.Use a level to check that cabinet is level side to side.
A
A. Level
4.Check that air conditioner cabinet is tilted to the outside so that water will run to the outside.
5.Reuse the insulation to seal opening between cabinet and frame.
6.Use existing holes in sides and top of cabinet and 7 - #10 x 1" wood screws (not provided) to attach cabinet to frame.
NOTE: Do not overtighten screws or cabinet will distort and provide a poor air seal between cabinet and air conditioner.
7.Caulk all outside wall openings around cabinet.
Complete Installation
1.Peel paper from adhesive backing on the 2¹⁄₂" (6.4 cm) seal strip. Place the 2¹⁄₂" (6.4 cm) seal strip inside the cabinet. Make seal flush with cabinet front edge.
NOTE: This seal strip fits between the air conditioner base and the cabinet.
A
WARNING
Excessive Weight Hazard
Use two or more people to move and install air conditioner.
Failure to do so can result in back or other injury.
4.Insert air conditioner into cabinet.
A. 2¹⁄₂" seal strip
NOTE: Handle air conditioner gently.
2.Peel paper from adhesive backing on one of the 2 short air conditioner seals. Align
A
B
A. Long, top air conditioner seal
B. Short
3.Make sure the free end of the ground wire is outside of the cabinet.
A
A. Make sure the free end of the ground wire is outside of the cabinet.
WARNING
Electrical Shock Hazard
Connect green ground wire to ground screw.
Failure to do so can result in death or electrical shock.
5.Connect green ground wire to cabinet base with ground screw.
10