1.Remove air conditioner from carton and place it on cardboard.
2.Remove shipping screws from each side wall of cabinet.
A
A 
A. Shipping screws
3.Remove front panel from air conditioner and set aside.
4.Remove ground screw and ground wire from front of air conditioner base. Save ground screw.
A
B
A. Green ground wire
B. Ground screw
5.Pull on handle to slide air conditioner out of cabinet. Place air conditioner on cardboard.
A 
B 
C 
D | E |
| |
| F |
A. Wire ties (2) | D. Compressor flange |
B. Unit support bracket | E. Remove this screw |
C. Upper shipping bracket | F. Lower shipping bracket |
3.Remove screw from end of lower shipping bracket attached to divider wall using a ¹⁄₄" nut driver or socket wrench.
4.Remove the other end of lower shipping bracket from compressor flange.
NOTES:
■If compressor flange interferes with sliding air conditioner back into cabinet, bend flange back against the compressor.
■Reinstall shipping brackets only if unit will be moved from its present location.
A
A. Handle
NOTE: Do not lift, push, pull or remove any expanded polystyrene (foam) from inside the air conditioner. It is not packing material.
Shipping bracket removal (on some models)
1.To remove upper shipping bracket from unit support bracket, cut the 2 wire ties with scissors.
2.Lift the end of the upper shipping bracket off of the unit support bracket and remove the other end from compressor flange.
Installing the Cabinet in a Window
■Handle air conditioner gently.
■Be sure your air conditioner cabinet does not fall out of the opening during installation or removal.
■The place where the power cord exits the air conditioner should be no more than 4 ft (122 cm) from a grounded 3 prong outlet.
■Do not block the louvers on the front panel.
■Do not block the louvers on the outside of the air conditioner.
Filler board installation
1.Center empty cabinet in window. Maintain a firm hold on the air conditioner cabinet. Lower window sash to hold cabinet in place.
2.Measure the distance between the right side of the cabinet and the inside of the window channel.
3.Repeat for the left side.
6
